|
|
|
High Flow Ductless Fume Hood
70" Wide Ductless Fume Hood
SS-370-DCH-D
|
|
 |
|
| |
|
When the application requires a filtered, 70” wide hooded type enclosure on the work surface, the SS-370-DCH-D Ductless Fume Hood may be an excellent choice. This unit features unique hinged folding side panels, a high-density polyethylene base, a clear polycarbonate top and a hinged sloping front lid.
For additional visibility, a transparent version is available at extra cost.
The powerful fans on top of the hood combine with a variety of Hepa and/or carbon filters to provide strong suction across the inlet area. Typical uses may involve the filtration of Toluene, MEK, Acetone, Alcohols, Solvents, and a variety of processes involving chemical fumes and dusts, where both a high velocity and high filtration area are a necessity.
Sentry Air's Ductless Fume Hood can provide an effective and economical solution for many commercial, medical, laboratory and industrial applications.
Click here to download a product brochure (PDF) |
SPECIFICATIONS
Hood Dimensions: |
O.D: 24" D x 72” W x 25" H
I.D.: 23.5" D x 70" W x 24" H |
Hood Material: |
Sides: .250" White Acrylic
Base: .500" White High Density Polyethylene
Top: .500" Clear Polycarbonate
Front: .250" Clear Polycarbonate |
Blower Dimensions: |
13" L x 13" W x 14.5" H |
Blower Material:
|
16 ga. carbon steel w/ polyester epoxy coating on all surfaces |
Total Weight:
|
115/1/60, Approx. 4 amps |
Motor
|
Fractional Horsepower |
Electrical:
|
115/1/60, Approx. 2 amps |
Sound Level
|
Approx. 61 to 66 dba (Blower Speed: Low to High) |
Approximate Inlet Velocities:
|
Pre-filter & 99.97% HEPA Filter - 170 FPM High; 25 FPM Low
Pre-filter & Heavy-duty Carbon Filter - 115 FPM High; 20 FPM Low |
Warranty:
|
Limited two-year warranty from date of shipment on defects due to materials or workmanship. |
Max Operating Temperature: |
Not to exceed 170 degrees Fahrenheit |
Patented Design:
|
U.S. PATENT #5,843,197 |
|
All specifications are nominal and subject to change without notice.
Not intended for explosive or highly flammable applications. (i.e. when the Lower Flammability Limit is exceeded for any given chemical).
Please consult the specific MSDS for questions regarding flammability limits.
|
|
|
|
|
|
Available
Ductless Fume Hoods:
|
