|
|
|
Dust and Fume Extractor
Mounted Single Sentry
SS-300-MSS
|
|
 |
|
The Mounted Single Sentry Fume Extractor is an excellent choice for limited workspace environments where efficient air filtration is desired. The self-supporting flex arm and a powerful fan combine to provide strong suction for the source capture of airborne contaminants from many operations such as soldering, light welding, powder filling, light grinding, and chemical fumes or dust, while under the table mounting frees up much needed workbench space.
The powerful fan on top of the hood combines with a variety of Hepa filters and carbon filters to provide strong suction accross the inlet area. Typical uses of Dust and Fume Extractor may include soldering, powder filling, and a variety of applications involving chemical fumes and dusts.
Quiet operation combines with a variety of HEPA filters and Activated Carbon Filters to provide an effective and economical solution for many commercial, medical, laboratory and industrial applications. |
SPECIFICATIONS
Cabinet Dimensions: |
13" L x 13" W x 15.75" H |
| Arm Dimensions: |
5" Dia X 32" L Flex Arm w/ Round Hood |
| Weight: |
40 to 55 lbs. |
| Cabinet Material: |
16 ga. carbon steel w/ polyester epoxy coating on all surfaces |
| Motor: |
Fractional Horsepower |
Air Volume: |
Variable Speed Control Standard on 115V
350 CFM High, Down to 50 CFM Low
On/Off Toggle Switch Standard on 220V |
Electrical: |
115/1/60, 2 amps
220/1/50, .75 amps
|
| Sound Level: |
61 to 66 dba (Blower Speed: Low to High) |
| Warranty: |
Limited two-year warranty from date of shipment on defects due to materials or workmanship. |
| Patented Design: |
U.S. PATENT #5,843,197 |
|
All specifications are nominal and subject to change without notice.
Not intended for explosive or highly flammable applications. (i.e. when the Lower Flammability Limit is exceeded for any given chemical).
Please consult the specific MSDS for questions regarding flammability limits.
|
|
|
|
|
|
Available
300 Series
Models:
|
