The Dual Arm Heavy Duty Industrial Fume Extractor is specifically designed for heavy loading applications that generate high volumes of fume and dust particulate. The powerful blower assembly suctions up to 1,300 CFM of air, while the two 10’ long HD Extractor Arms offers exceptional reach and hold for precise fume source capture. The total reach of the arms is 20’ going from side to side, and can easily access dual operator stations. For easy mobility around the shop, the SS-D10FA-MP1 features fork lift legs that allow the operators to transport the system with ease if necessary. The unit is designed to be stationary and can be permanently bolted to the shop floor if desired.
This system is equipped with four cleanable Micro-Pleat Series 1 Particulate Filters (up to 95% efficient on particles down to 0.3 microns and larger in particle size) and is designed for applications such as production welding (MIG, TIG, Stick, Plasma Cutting), grinding, powder weighing, bulk powder transfer, some dust collection applications, multiple operator fume extraction (classroom settings, multiple soldering, welding, and brazing stations), and more. Over a year of research and testing was performed in developing this particulate media filter that is both highly efficient and cleanable.
The Particulate Filters are engineered to be easily cleaned with the use of pressurized air. This form of self-contained cleaning does not require removal of the filters; the operator simply sprays air into the filter media to clean and rejuvenate them while excess dust and waste falls into the internal dust pan, allowing for simple and clean debris removal. The included magnehelic gage is an excellent tool for determining filter saturation. Once the pressure levels begin to increase, the operator can clean the filters and the pressure reduction will be noted on the gage. For applications that do not require as much airflow, an included variable speed controller is added to help reduce and control the airflow rates. This would be helpful in applications where shielding gases are critical.
All specifications are nominal and subject to change without notice. Not intended for explosive or highly flammable applications. (i.e. when the Lower Flammability Limit is exceeded for any given chemical). Please consult the specific MSDS for questions regarding flammability limits.
100 Series (Up to 80 CFM)
200 Series (Up to 100 CFM)
300 Series (Up to 350 CFM)
400 Series (Up to 700 CFM)
450 Series (Up to 950 CFM)
500 Series (Up to 1300 CFM)
Extractor Arms (Exhaust Hoses)
Accessories (For All Products)