The Industrial Downdraft Table is a highly effective stainless steel source-capture solution for the extraction of fume, dust, and smoke at the work surface level. This safety engineering control helps to protect the operator’s breathing zone and surrounding environment from hazardous airborne contaminants by creating a negative-pressure and pulling respirable particles into the filtration system.
These negative-pressure systems are designed to eliminate costly exhaust systems, reduce energy losses, and aid in employee protection by capturing pollutants at the source of emission. By utilizing our 400 series fume extraction system, the air cleaner provides up to 700 CFM of air volume and is equipped with high-quality HEPA filtration media that is up to 99.97% efficient on particles 0.3 microns and larger.
|Bench Dimensions:||Perforated Work Area:|
|- (48"W x 30"D x 35"H Featured)||- Stainless Steel ¼" Perforated Work Area|
|Cabinet Dimensions:22.5" D x 20" W x 19.5" H||Total Weight: Approx. 150 lbs.|
|Motor: Fractional Horsepower|
HEPA Filter - Up to 99.97% efficient on particles down to 0.3 microns in size.
ASHRAE Filter - Up to 95% efficient on particles down to 0.5 microns in size.
ULPA Filter - Up to 99.9995% efficient on particles down to 0.12 microns in size.
Activated Carbon & Specialty-Blended Filters - Efficiency varies per chemical.
Air Volume: 700 CFM High, Down to 50 CFM Low
|115/1/60, 2.5 amps||60 dba @ 3 ft. from hood inlet|
|220/1/50, 1.5 amps|
Industrial Downdraft Table
Portable Downdraft Table